Titanium Alloy Gr 5 Round Bars, Titanium Alloy Gr 5 Round Bars Manufacturers, Titanium Alloy Gr 5 Round Bars Suppliers, Titanium Alloy Gr 5 Round Bars Importers, Titanium Alloy Gr 5 Round Bars Exporters, Titanium Alloy Gr 5 Round Bars Stockists.
Titanium Alloy Gr 5 Round Bars in Mumbai, Titanium Alloy Gr 5 Round Bars Manufacturers in Mumbai, Titanium Alloy Gr 5 Round Bars Suppliers in Mumbai, Titanium Alloy Gr 5 Round Bars Importers in Mumbai, Titanium Alloy Gr 5 Round Bars Exporters in Mumbai, Titanium Alloy Gr 5 Round Bars Stockists in Mumbai.
Titanium Alloy Gr 5 Round Bars in India, Titanium Alloy Gr 5 Round Bars Manufacturers in India, Titanium Alloy Gr 5 Round Bars Suppliers in India, Titanium Alloy Gr 5 Round Bars Importers in India, Titanium Alloy Gr 5 Round Bars Exporters in India, Titanium Alloy Gr 5 Round Bars Stockists in India.
Titanium Alloy Gr 5 Round Bars
Mercury Piping Solutions is a respected association that is basically busy with giving a sweeping grouping of Titanium Grade 5 Round Bars and Rods. We offer the equivalent at moderate expenses to our clients. Titanium Grade 5 Round Bars and Rods is made up from to an extraordinary degree little separations across of wire for welding, quite far up to greater estimations, used for flywheels and hold. Subtleties for Titanium Grade 5 Round Bars and Rods fuse flying, therapeutic and present day.
In the meantime, our association have complex base, where we store our extent of items. We offer our items to all inclusive market and assurance to offer our items with quality and sturdiness. As a provider, stockiest, exporter and producer, we give these Titanium Grade 5 Round Bars and Rods in exceptionally collected thicknesses and sizes as showed by exact necessities of our inside and out regarded sponsors.
Titanium Alloy Gr 5 Round Bars Specifications:
| Standard | ASTM B348 / ASME SB348, ASTM B863 / FB863 |
|---|---|
| Grade | Titanium Grade 5 (UNS No. R56400) |
| Size | 6mm - 200mm Dia |
| Length | 100mm – 6000mm |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish , etc |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
| Application | Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining |
Chemical Composition of Titanium Alloy Gr 5 Round Bars
| Al | Fe | O | Ti | V |
|---|---|---|---|---|
| max | max | max | max | max |
| 6 | 0.25 | 0.2 | 90 | 4 |
Mechanical Properties of Titanium Alloy Gr 5 Round Bars
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
|---|---|---|---|
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile Strength, Ultimate | 950 MPa | 138000 psi | |
| Tensile Strength, Yield | 880 MPa | 128000 psi | |
| Elongation at Break | 14 % | 14 % | |
| Reduction of Area | 36 % | 36 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
Physical Properties of Titanium Alloy Gr 5 Round Bar
| Physical Properties | Metric | English |
|---|---|---|
| Density | 4.43 g/cc | 0.16 lb/in³ |